ClubIsuzu.org the new home of Clubisuzu.com

I know this is an old thread but for anyone new who Google's this. There are 2 electrical plugs under the seat. Unplug the one going to the buckle on both seats.

For all the nae-sayers out there I always wear my belt when driving on the road but not when cruising around the farm in low range.

Hi all i have a couple quick questions about this conversion

1- Can i use 4JB1(rodeo) clutch/flywheel/pressure plate in 4JX1 box? Would i need to change bellhousing/clutch cylinder/starter?

2- does rodeo box bolt into Jackaroo?

Hey guys. Myself and a mate are currently doing this conversion. The 4JX1 is out and we have found that the clutch needs replacing. These are ridiculously expensive and was wondering if its possible to leave clutch setup from 4JB1 on? does Jackaroo bellhousing bolt straight up to 4JB1? would i then ...

Hey Guys i have a twin-cab TF rodeo 95 and it has a painfully small fuel tank. I have read that the twin-cabs had like a 45-50 litre tank whereas the single and extra cabs had a 75 litre tank. Just wondering if anyone had found a tank that goes in reasonably easily to increase volume?

Yeah thanks for all the feedback guys. I thought it would be ok as i didn't touch the injection pump until after first driving it with egt gauge in and then once i fiddled with pump got same temps. When cruising with no load at 100kmh(probs 108 as running 31" tyres) in 5th it seems to want to sit ...

Hi All about a year ago i bought a 4JB1 turbo TF rodeo and after reading many posts on this site went down the road of 2.5" exhaust with custom dump. Wound up boost to 15psi, Fitted EGT gauge and put sensor just before turbo on manifold. My question is after i installed the EGT gauge i took it for a ...