Page 1 of 2
where to buy parts for "90" MU
Posted: Tue Apr 24, 2018 5:52 am
by slothy
Gday all,
just got my self a "90" MU and am chasing some new cv joints but can't find any one that has them, who do you all use to get parts in aust??
cheers
CJ
Re: where to buy parts for "90" MU
Posted: Tue Apr 24, 2018 7:21 am
by geeves
Pretty certain rodeo and jackeroo parts are the same
Re: where to buy parts for "90" MU
Posted: Tue Apr 24, 2018 8:14 am
by slothy
yea thats what i am lead to believe but I'm not 100%, if i buy jackaroo CV's would i just order the same year as my MU or is there a specific year thats the same?
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 3:40 am
by geeves
For a 90 you should be ok. 88 to 91 jackeroo will fit. It gets trickyer on later Mus as up to 94 you still needed these same cvs. Are yours clicking?
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 4:38 am
by slothy
am missing one so was going to replace both, have just bought it like this
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 4:59 am
by slothy
just looked on drive tech 4x4 and they have the "90"jackaroo axels in stock, DTS200 and DTS201, these are for a UBS17 7/88-12/92 4ZE1 SOHC 8v EFI 4cyl 2.6L, so I'm hoping these will fit.
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 6:19 am
by geeves
Should be ok but a big caution. The after market cvs do not perform as well as originals. Better to buy second hand originals
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 9:14 am
by slothy
cheers for that, wouldn't happen to know the best place to buy originals?
Re: where to buy parts for "90" MU
Posted: Wed Apr 25, 2018 6:01 pm
by geeves
In Aus Wreckers Ebay local classifieds or ask here.
Re: where to buy parts for "90" MU
Posted: Tue May 15, 2018 9:11 am
by slothy
ok been trying every where i can think of for a R/H CV assembly but not having any luck, does any one have part numbers i can cross reference? have found some for a jackaroo of the same model from drive tech 4x4 but there not sure if they'll fit or not. repco haven't been any help either. i know every one says get standard but not having any luck atm and just want to get it going for now.