ClubIsuzu.org the new home of Clubisuzu.com

Was having power window troubles! and beeing so expensive to replace and no guarNteed that new ones would work! Installed wind up windows! bolted straight in. For 60$ per window is a well worth it! now can open and close the window with no power!!!!
Wind up regulators are from a tfs rodeo!

I just bought a brand new switch, cost me under $100 and fitted in 2 mins

I'm jealous...My power window system is old and fat nowadays, I literally have to give a hand to my windows every time I want to close them

Pull the door cards off, lubricate the slides with silicone spray and the pulleys with WD40 or similar

the problem i have with both windows. Is the middle guide is not tight now. Its white plastic and slides up the center metal rail to keep window straight. Cant buy them so i have to push the window back to keep it going. Unless i spray wd40 down rails every few days. Anybody know where i can get them. there not the white bits that are at the bottom of glass, have new ones of them.

I have seen the white plastic bits on eBay for sale for the windows they are for Holden rodeos but should be the same as a MU
Are these what you are looking for http://www.ebay.com.au/itm/2X-DOOR-GLAS ... 1e77d778e2

na i have a set of them they may help siliconed in a slightly different spot to keep windows bask.
its a bit that runs up and down the center track of the middle rail, still while and same plastic. Will get piks next time i take trim off.