Page 1 of 2
FS: Bullbar, steps, exhaust, more Brisbane
Posted: Mon Mar 24, 2014 1:32 am
by nut161
Hi i have the following bits for sale that i no longer require, all where only removed for upgrades. Will take offers on the parts, as i dont need them and want them gone prices will be pretty low.
Stock black front bar
http://tinypic.com/m/i3uipl/2Modded alloy jackaroo bar (only removed for arb bar install) and side wind deflectors
http://tinypic.com/m/i3uiqc/2chequer plate side steps
http://tinypic.com/m/i3uiqg/2Small front bar with lights
http://tinypic.com/m/i3uiqq/2exhaust from turbo back
http://tinypic.com/m/i3uiqs/2
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Wed Mar 26, 2014 11:06 am
by sleeker
Hi Mate how much do you want for the parts?
also is the exhaust standard one or larger? if larger what is the diameter?
Thanks in Advance
Andrew
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Thu Mar 27, 2014 5:57 am
by nut161
Which parts are you chasing, or are you after the lot?
I think its a 2.25 or a 2.5, steps up after the first section from the turbo which isnt in the pics but is included
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Thu Mar 27, 2014 7:02 am
by sleeker
Hi mate I'm interested in the modded jackaroo bar and the exhaust but only if it is definitely larger diameter.
Also did the jackaroo bar fit on ok on the mu? Have you got any pics of it?
Cheers
Andrew
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Thu Mar 27, 2014 8:20 am
by nut161
20140125_174529.jpg
Heres the bar, only removed it as i found an arb winch bar.
Exhaust measures approx 55mm and steps up from factory as the exhaust turns behind the gearbox.
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Fri Apr 04, 2014 12:39 am
by koguma
Hi,
I have a 92 MU 2.8 Td. Will it fit this?
Am looking for a replacement front bumper bar. Mines chrome, but has been pressed in a bit at the centre (I nudged something!)
How much for your stock black front bar?
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Sun Apr 06, 2014 9:19 pm
by nut161
Im pretty sure it would, $40?
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Wed Apr 16, 2014 7:16 pm
by koguma
No worries. Is yours off a 91 2.8 td MU?
If so. I'm interestered.
Where are you located in BNE?
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Sun Apr 20, 2014 10:37 pm
by nut161
sorry for the late reply, holidaying in NZ (astounded by the amount of isuzus over there)
Yep thats exactly my model, im at keperra
Re: FS: Bullbar, steps, exhaust, more Brisbane
Posted: Sat Apr 26, 2014 10:13 pm
by peter6163
Hey mate how much for the rodeo bull bar
Cheers peter